TRITTON Wireless Force Feedback Wheel for Xbox 360 - Manual (Page 2)

WIRELESS RACING WHEEL with FORCE FEEDBACK (ENGLISH)
Thank you for purchasing the Mad Catz Wireless
Racing Wheel with Force Feedback for use with the
Xbox 360 video game system. Be sure to register your
product online at www.madcatz.com and
check out our full line of other quality video game
accessories.
WARNING Before using this product, read the
manuals for this accessory and the Xbox 360 console
(and any other applicable manuals) for important
safety and health information. Keep all manuals for
future reference. For replacement Xbox manuals,
see www.xbox.com/support or call Xbox Customer
Service.
GENERAL SETUP
1. Attach the main pedal unit to the pedal unit base,
ensuring it clicks firmly into place.
2. Place the complete pedal unit on the floor for your
optimum driving position.
3. Insert the cable from the pedal unit into the socket
on the Wheel unit, ensuring the connector clicks
firmly into place.
4. Plug the AC Adapter into a power outlet and
connect it to the Wheel unit, ensuring the
connector clicks firmly into place
DESK CLAMP AND DETACHABLE LEG SUPPORTS
Desk Clamp:
1. Attach the Desk Clamp to the main Wheel unit as
shown in the diagram.
2. Position the steering Wheel unit on the edge of
your desktop, and then turn the clamp screw
clockwise until the unit is securely attached to
the desk. Do not over tighten!
Leg Supports:
If a suitable level surface to set the Wheel on is not
available, attach the Leg Supports as shown in the
diagram.
POWERING ON/SYNCING THE WHEEL
Powering ON:
1. Ensure the Xbox 360 console is powered ON.
2. Press the Xbox Guide Button on the front of
the Wheel.
Note: The wheel will not power on unless the AC
Adapter is connected.
Syncing:
1. Press the Connect button on the front of the
Xbox 360 console.
2. Press the Connect button ON the rear panel
of the Wheel.
SWAPPABLE GEAR SHIFT
To switch Gear Shift sides, pull the stick out of
the socket and clip into place on the other side of
the Wheel.
USING THE HEADSET ADAPTER
1. Insert Microsoft headset into Female end of cable.
2. Plug Male end of adapter cable into headset port
audio socket.
GAME COMPATIBILITY
NOTE: Most current-generation racing titles
automatically detect the Racing Wheel when
properly connected to an Xbox 360 console. If your
game is not 100% compatible with the Racing Wheel
after setup, please consult the game’s instruction
manual for assistance with in-game adjustments.
Control layouts for legacy titles can be found below:
PROjECT GOTHAM RACING 3 (PGR3) AND FORzA 2
WHEEL CONTROL MAPPING
Project Gotham Racing 3 by default uses the B Button
(Gear Up) and X Button (Gear Down / Reverse) to
control gear shifting and does not switch to Left
Bumper (Gear Down / Reverse) and Right Bumper
(Gear Up) when a wheel is connected. PGR3
therefore requires some configuration to use Xbox
360 standard wheels. Directions for re-configuring
PGR3 are below:
1.1. Press START Button and/or A Button until the
MAIN MENU is displayed.
1.2. Scroll down to the MORE… option using the
D-pad and press the A Button.
1.3. Scroll down to the OPTIONS option using the
D-pad and press the A Button.
1.4. Scroll down to the CONTROLLERS option using
the D-pad and press the A Button.
1.5. Scroll down to the Wheel A option using the
D-pad, then press the A Button to save this
configuration and exit the CONTROLLERS menu.
1.6. Press the B Button to exit the OPTIONS menu
and return to the MORE … menu.
1.7. Press the B Button to exit the MORE … menu
and return to the MAIN MENU.
Forza 2 will implement this switch automatically
when it detects a wheel has been connected.
TROUBLESHOOTING
PROBLEM: The Wireless Racing Wheel will not
function.
SOLUTION: If the Wireless Racing Wheel continues
to not function, turn the power to your Xbox 360 video
game system OFF, disconnect the Wireless Racing
Wheel and reconnect the Wireless Racing Wheel. Turn
the power ON to your Xbox 360 video game system and
retry the game.
PROBLEM: Vehicle control is touchy or sluggish.
SOLUTION: Go to the software options menu and adjust
the steering sensitivity and dead zone if available.
PROBLEM: The vehicle drifts in one direction.
SOLUTION: Turn OFF the controller (hold the Guide
button until the onscreen menu appears and select
‘Turn Off Controller’) then turn the controller back ON.
Restart the system if necessary.
PROBLEM: The game acts as if one of the pedals is
being activated.
SOLUTION: Turn OFF the controller (hold the Guide
button until the onscreen menu appears and select
‘Turn Off Controller’) then turn the controller back ON.
Restart the system if necessary.
PROBLEM: The Wireless Racing Wheel Force
Feedback will not function.
SOLUTION: If the Wireless Racing Wheel continues
to not function, first check the game being played
supports force feedback. If it does, then follow
the steps for ‘The Wireless Racing Wheel will not
function’ problem.
PROBLEM: How do I perform a firmware update
SOLUTION: For firmware updates go to
madcatz.com/support
NOTE: You can not turn OFF the controller when in a
game, please exit back to the dashboard first.
2-YEAR LIMITED WARRANTY
Mad Catz warrants this product to be free from defects in materials and workmanship for the warranty
period. This non-transferable, two (2) year limited warranty is only valid for the original purchaser. If a
defect covered by this warranty occurs AND you have registered your product with Mad Catz AND you
provide proof of purchase, Mad Catz, at its option, will repair or replace the product at no charge.
The Mad Catz two (2) year limited warranty is available to North American and European customers. Your
sole and exclusive remedy is repair or replacement of your Mad Catz product. In no event shall Mad Catz
liability exceed the original purchase price of the product. This warranty does not apply to: (a) normal
wear and tear or abusive use; (b) industrial, professional or commercial use; (c) if the product has been
tampered with or modified.
To receive warranty service you must:
-
North America: call Mad Catz Technical Support at 1.800.659.2287
or 1.619.683.2815
- Europe: call Mad Catz Technical Support at +44 (0) 8450-508418
- Obtain a Return Authorization Number from Mad Catz Technical Support
- Ship the product to Mad Catz at your expense for service
- Enclose a copy of the original sales receipt showing a
purchase date
- Enclose a full return address with daytime and evening phone numbers
TECHNICAL SUPPORT
Online Support and User Guides: www.madcatz.com
North American E-mail: [email protected]
North American telephone: Available 8 A.M. – 12 P.M., 1 P.M. – 4 P.M. Pacific Standard Time, Monday
through Friday (excluding holidays) at 1.800.659.2287 (US only) or 1.619.683.2815 (outside US).
European E-mail: [email protected]
European telephone: Available 9 A.M. to 5 P.M. Greenwich Mean Time, Monday through Friday (excluding
bank holidays) at +44 (0) 8450-508418
CAUTIONS
- Use this unit only as intended.
- To prevent fire or shock hazard, do not expose this unit to rain or moisture. Do not use within 30’ of any
water such as swimming pools, bathtubs, or sinks.
- To avoid electrical shock, do not disassemble. Refer servicing to qualified personnel only.
- Never insert objects of any kind, other than authorized items, into the product as they may touch
dangerous voltage points or short out parts that could result in fire or electrical shock.
- Stop using this unit immediately if you begin to feel tired or if you experience discomfort or pain in
your hands and/or arms while operating the unit. If the condition persists, consult a doctor.
- Do not attempt to operate the unit in any way except with your hands. Do not bring the unit in contact
with your head, face, or near the bones of any other part of your body.
- Avoid prolonged use of this unit. Take breaks every 30 minutes.
- Route all cords so that they are not likely to be walked on or tripped over. Make sure that cords
are not placed in a position or areas where they may become pinched or damaged.
- Do not wrap cords around any part of anyone’s body.
- Do not allow children to play with cords.
- This unit should be operated only from the power source indicated on the unit. If you are not sure of
the type of electrical power supplied to your home, contact your local power company.
- Do not overload wall outlets or extension cords beyond their capacity, since doing so can cause fire
or electric shock.
SEIzURES
Some indivduals may have seizures or black outs triggred by the flashing lights on television or in video
games, even if they have never before had a seizure.
Anyone who has had a seizure, loss of awareness, or other symptom linked to an epileptic condition should
consult a doctor before playing a video game.
Parents should be aware when their children play video games and observe them regularly. Stop playing
and consult a doctor if you or your child have any of the following symptoms:
Convulsions
Loss of awareness
Involuntary movements
Eye or muscle twitching
Altered vision
Disorientation
When playing video games:
1. Sit or stand as far from the screen as possible.
2. Play video games on the smallest available screen.
3. Do not play if you are tired or need rest.
4. Play in a well-lighted room.
5. Take a 15-minute break every hour.
REPETITIvE MOTION INjURIES
Playing video games (and the repetitive motion involved) can make your muscles, joints or skin hurt.
Playing video games in moderation can help avoid such damage. Also:
-
Take a 15-minute break every hour, even if you don’t think you need it.
- If your hands, wrists or arms begin to hurt or feel sore or tired, stop playing and rest them for several
hours before playing again.
- If pain and soreness continues, stop playing and consult a doctor.
Model Number: 47502
Trade Name: Wireless Racing Wheel with Force Feedback
FCC NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Where shielded interference cables have been provided with the product or specified additional
components or accessories elsewhere defined to be used with the installation of the product, they must be
used in order to ensure compliance with FCC regulations.
EU DECLARATION OF CONFORMITY:
As required, certain of these products have been tested and conform to the requirements of the European
Union Directives 1999/5/EC, 2002/95/EC, 2002/96/EC, and 2004/108/EC. Authorized signatory of the
manufacturer is Mad Catz, Inc., 7480 Mission Valley Road, Suite 101, San Diego, CA 92108.
©2011 Mad Catz, Inc. 7480 Mission Valley Road, Suite 101, San Diego, CA 92108 U.S.A. Mad Catz and the
Mad Catz logo are trademarks or registered trademarks of Mad Catz, Inc., its subsidiaries and affiliates.
The shape and design of this product are a trade dress of Mad Catz. This product is manufactured under
license from Microsoft Corporation. Microsoft, Kinect, Xbox, Xbox LIVE, Xbox 360, and the Xbox logos are
trademarks of the Microsoft group of companies. All other product names and images are trademarks or
registered trademarks of their respective owners. Made in China. All rights reserved. Product features,
appearance and specifications may be subject to change without notice. Please retain this information
for future reference.
TouchSense® Technology Licensed from Immersion Corporation. Protected by one or more of the
following patents:
U.S. Patents: 5831408, 5844392, 5857986, 5907487, 5959613, 6020875, 6088017, 6104158, 6219032, 6246390,
6252583, 6271833, 6275213, 6278439, 6343349, 6400352, 6411276, 6424333, 6715045, 6801008, 7131073, 7199790,
7209117, 7299321, 7327348, 7345672, and 7502011.
Product No. 47502 08/11
47502_MUG
BACK