Pft8810 – Vogels PFT 8810 User Manual
Page 2
www.vogels.com
9532-010-Z01-00
3x
5mm
4x
4x
1
2
Install the upper cross brace between the inside frame rails
with the four each M8 x 60mm button head Allen screws and
flat washers supplied. Tighten all eight M8 x 60mm button
head Allen screws to create a firm frame structure at this
time.
If this is a “one man” installation find a “friendly” clear flat
wall to place one leg assembly along side. Place the bot-
tompanel on top of the legs channel between the “upright”.
Next place the second leg over the bottom panel so all four
through holes line up and loosely secure the lower pan to
the legs with the four M8 x 1.25 x 60mm “button head Allen
head screws and M8 flat washers supplied.
3
42
1
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
PFT8810
x1
x72
x1
x54
x54
x54
x1
x54
x54
x54
x54
x54
x54
3/16”
M8 x 25mm
M8 x 16mm
M4 x 16mm
M4 x 25mm
M5 x 16mm
M5 x 25mm
M6 x 25mm
M6 x 16mm
x1
5mm
M8 x 60mm
M8
M6 x 10mm
M4
M4
M8
x4
x20
x20
x4
x4
x16
Required for installation
13mm
5/16”
4mm