Vogels PFT 8855 - Manual (Page 7)

www.vogels.com 9531-060-001-00
1
3
2
20
19 18
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
PFT8855
M2.5
M10
With the 2.5mm Allen head wrench supplied install the two
each M5 x 6mm mini adjustment Allen head screws supplied
to both sides of the “rotation” stop bar. slowly turn the dis-
play to the level position in each direction and adjust the two
adjust screw to set max rotation in each direction to level.
Vertical flatness of the installed display can be adjusted us-
ing an M10 socket and ratchet on the lower “head assembly.
IT helps if someone is gently lifting “out” on the lower display
as the “tilt in” adjustment is made. Friction of the rotation can be adjusted by increasing or
decreasing the friction screw on either side of the receiver
assembly penetration of the two installed friction screw with
a Phillips head screwdriver.