Vogels PFT 8805 - Manual (Page 7)

www.vogels.com 9532-010-Z00-00
2x 3x 4x
19 18
17 16
Installation Guide
Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids
PFT8805
Once center and level of the brackets are confirmed secure
the bracket firmly to the display. Repeat this procedure for
all nine displays being installed. Confirm the upper adjust-
ment screws are center together by confirming all three
notches are aligned. Place the left and right mounting bracket (kickstand facing
in on both brackets) and confirm the center of the bracket
“notch” is exactly center between the top and bottom edge of
the display and secure with the four each appropriate pitch
and length screws supplied for your display. Note: accessory
plastic spacer are supplied in case separation between the
bracket and the display is require for clearance purposes.
Starting with the lower level cross bar and confirm the
lower bracket security screws are wide open install the first
display on the lower left side and confirm it is level both in
the horizontal and vertical plane with a spirit level. Repeat
the same procedure for the second and third display on the
lower level. Create a 1/16” clearance between the side bezel
edges of the displays and secure the display to the cross bar
with the lower security screws on each bracket.