Vollrath VB9 - Manual (Page 16)

English
Vertical batch freezer
16
STEP 1
- extract the rod [25] from the lid’s hinge and remove the lid
[5];
RESIDUAL HAZARD: BEATER'S BLADES ARE
SHARP ALONG BOTTOM AND EXTERNAL SIDE
EDGES. IT IS RECOMMENDED TO USE SUITABLE
PROTECTIVE GLOVES AND TO HANDLE THE
BEATER ONLY BY HOLDING THE CENTRAL HUB
AND NOT THE BLADES.
- Unscrew counterclockwise the fixing knob [7] and extract
the beater [6];
- remove the basin support [10] by unscrewing the hand
screws [16];
- unhook chute [9] from hinges [26] and remove it;
- remove the scraping blades [31] from the beater [6];
- unscrew counterclockwise the 2 fixing knobs [41] and
remove the extraction door [40], taking extremely care not
to damage its surface and not to loose its parts .
TAKE CARE NOT TO ALLOW WATER OR ANY
LIQUID INSIDE THE MACHINE.
STEP 2
Prepare a pail with a solution composed by 1 gal. of water and
1/4 oz. of disinfecting SANI- T- 10 manufactured by SPARTAN
CHEMICAL and carry out the cleaning of the underlisted parts,
using the provided brushes as illustrated in the drawings.
- the beater [6] and the fixing knob [7];
- the beater's blade [31];
- the lid [5];
- the chute [9];
- the drip tray support [10];
- the locking door [40]
STEP 3
Prepare a pail with a solution composed by 1, 5 gal. of water and
1/3 oz. of disinfecting SANI- T- 10 manufactured by SPARTAN
CHEMICAL and immerse for at least 5 minutes the underlisted
parts:
- the locking door [40];
- the fixing knob [7];
- the beater [6]
- the beater's blade [31];
- the chute [9];