Vollrath Mirage Cadet G1 1800 Watt Countertop Induction Ranges - Manual (Page 2)

F
oodservice
i
nduction
r
anges
O
peratOr
’
s
M
anual
2
„ Do not heat sealed cans or containers as they may explode.
„ Do not operate unattended.
„ Closely supervise units operating in public areas and/or around
children.
„ Do not place any objects inside the air intake or exhaust panels.
„ Do Not Cook on Broken Cook-Top - If cook-top should break, cleaning
solutions and spill overs may penetrate the broken cook-top and
create a risk of electrical shock.
„ Clean Cook-Top with Caution - If a wet sponge or cloth is used to wipe
spills on a hot cooking area, be careful to avoid steam burn, some
cleaners can produce noxious fumes if applied to hot surface.
„ Do not place weight on the control knob.
„ SAVE THESE INSTRUCTIONS.
F
unction and
P
urPose
This unit is intended to be used with induction-ready cookware (see below)
with a flat, ferrous base measuring 4-1/2” (11.4 cm) to 10-1/4” (26 cm) wide.
This unit is intended for use in commercial foodservice operations only. It is
not intended for household, industrial or laboratory use.
i
nduction
r
eady
c
ookware
„ Ferrous stainless steel
„ Iron
„ Cast iron
u
nsuitable
c
ookware
„ Cookware with a base less than 4-1/2” (11.4 cm)
„ Pottery, glass, aluminum, bronze or copper cookware
„ Cookware with any type of footed base
NOTE:
There must be a minimum of 4” (10 cm) between the induction
range and any surrounding surface to allow sufficient airflow
around the unit. Blocking the airflow could overheat the unit.
i
nstallation
This unit is to be used on a flat, level surface.
NOTE:
This unit is not designed to be inclosed or built into any area.
There must be a minimum of 4” (10 cm) of space between the rear
of the induction range/warmer and any surrounding surface.
There must be 1/2” (2 cm) between the bottom of the induction
range/warmer and any surrounding surface.
Sufficient airflow must be allowed around the unit. Blocking the
airflow could cause the unit to overheat.
1. Place the induction range/warmer on a flat stable surface.
2. Plug the power cord into a grounded electrical outlet with the matching
nameplate rated voltage.
NOTE:
Using a voltage other than the nameplate rated voltage will cause
damage to the unit. Incorrect voltage, modification to the power
cord or electrical components can damage unit and will void the
warranty. Induction units are to use a separate dedicated circuit.
s
aFety
P
recautions
To ensure safe operation, read the following statements and understand
their meaning. This manual contains safety precautions which are
explained below. Please read carefully.
WARNING
Warning is used to indicate the presence of a hazard that can cause
severe personal injury, death, or substantial property damage if the
warning is ignored.
CAUTION
Caution is used to indicate the presence of a hazard that will or can
cause minor personal injury or property damage if the caution is
ignored.
NOTE
Note is used to notify people of installation, operation, or maintenance
information that is important but not hazard-related.
For Your Safety!
These precautions should be followed at all times. Failure to follow
these precautions could result in injury to yourself and others or
damage the equipment.
Important Safeguards
To reduce risk of injury or damage to the unit:
„ Read all instructions before using the appliance.
„ Plug only into grounded electrical outlets matching the nameplate rated
voltage.
„ Each outlet requires a separate circuit. Do not use extension cords, power
strips or surge protectors with this unit.
„ As a precaution, persons using a pacemaker should stand back 12”
(30 cm) from an operating unit. Studies have shown that the induction
element will not disrupt a pacemaker.
„ Keep all credit cards, driver licenses and other items with a magnetic strip
away from an operating unit. The unit’s magnetic field will damage the
information on these strips.
„ The heating surface is made of a strong, non-porous material. However,
should it crack or break, stop using and immediately unplug the unit.
„ Do not leave an empty pan on an operating unit.
„ Unit should only be used in a flat, level position.
„ Unplug from outlet when not in use and before cleaning. Allow to cool
before putting on or taking off parts.
„ Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions or has been damaged in any manner. Return
appliance to the nearest authorized service facility for examination, repair
or adjustment.
„ Do not touch the cooking surface. It remains hot after the unit is turned off.
„ The use of attachments not recommended by the appliance manufacturer
may cause injuries.
„ Do not use outdoors.
„ Extreme caution must be used when moving an appliance containing hot
oil or other hot liquids.
„ Do not use appliance for other than intended use.
„ Always attach plug to appliance first, then plug cord into the wall outlet. To
disconnect, turn any control to “off”, then remove from wall outlet.
„ Do not spray controls or outside of unit with liquids or cleaning agents.
„ To protect against electrical shock do not immerse cord or plug in water.
Keep cord away from heated surface. Do not let cord hang over edge of
table or counter.
„ Do not place on or near a hot gas or electric burner or in a heated oven.