AEG COMPETENCE B3040-1 - Manual (Page 32)

32
Cleaning with Pyroluxe
1 Warning! The oven becomes very hot during pyroluxe self-cleaning.
Keep young children well away from the oven.
1 Important: Before carrying out pyroluxe cleaning the oven must be
completely emptied with the exception of the shelf support rails. Also
remove the fat filter!
0 1. Select the pyroluxe oven function.
2. Turn the temperature selection
switch clockwise to the end posi-
tion. Pyroluxe cleaning will begin
after a few seconds and will switch
itself off again automatically after 2
hours 30 minutes.
3. When pyroluxe cleaning has been
completed, turn all switches to the zero position.
4. After it has cooled down, wipe out the oven with a damp cloth.
3 During pyroluxe cleaning, the door is locked and the oven lighting is
off. The temperature pilot light will come on until the door lock is
released.
Oven Light
1 Warning: Risk of electric shock! Prior to changing the oven light:
– Switch off the oven!
– Either remove or switch off the fuses in the fuse box.
Replacing the oven light bulb/cleaning the glass
0 1. Remove the right shelf support rail.
2. Place a cloth on the floor of the
oven.
3. Remove the glass cover by turning
it anti-clockwise and then clean it.
4. Replace with
40 watt, 230 V, 300 °C
heat-resistant oven lighting.
5. Refit the glass cover.
6. Remove the cloth from the oven.
0