Alpine TCS-V430A - Manual (Page 14)

14
10. TV POWER Key
Power ON/OFF control for TCS-V430A is as follows:
• POWER ON: Press TV POWER key when there is no video signal from any
external input.
It is automatically turned ON when the TCS-V430A detects a video
signal input on any one of the 3 External inputs.
• POWER OFF: Press TV POWER key when there is no video signal from any input.
NOTE: As long as there is a video signal detected on any of the external inputs, the unit
cannot be turned off. Once the unit is turned on manually, it will not turn off
automatically even if there is no video signal.
OPERATION - TV Tuner Control Functions
OTHER FEATURES
Reset Switch
The reset switch, located on the side of the unit, is for returning the unit back to its
original factory settings.
All memory contents will be erased and all settings on the unit will return to their factory
defaults.
Power Indicator LED
The Power Indicator LED shows the unit status as follows:
• POWER ON: Always ON; Unit is active.
• STAND-BY: Blinking; Unit is OFF but receiving power from the iginition/acc
line and is awaiting the Power ON command.
• NO POWER: Always OFF; The vehicle’s IGN/ACC line is OFF or the fuse has
burned out. The unit cannot be turned ON.
Last Status Memory
TCS-V430A retains its current status and memory contents even when no power is
supplied. Therefore, the unit remembers its last status so when power is restored it will
continue where it left off.
Multiple Remote Signal Combination
The TCS-V430A can accept up to 3 remote inputs for user convenience. This enables
remote control operation from whichever monitor that the passenger is watching.
The remote signal can be connected directly from any ALPINE Monitor product that has
a built-in remote eye. The External Remote Eye supplied with TCS-V430A can be used
for other monitor brands.