Camera ready light status – Kodak Z885 User Manual

Page 62

Advertising
background image

56

www.kodak.com/go/support

Troubleshooting

Camera ready light status

Picture is too dark.

Turn on the flash (

page 11

).

Move so there is no more than 11.8 ft (3.6 m) in wide angle and
6.9 ft (2.1 m) in telephoto between the camera and the subject.

Use Fill flash (

page 11

) or change your position so light is not behind

the subject.

Increase Exposure Compensation (

page 14

).

Camera does not
recognize
SD/MMC card.

Purchase a certified SD/MMC card.

Reformat the card (

see page 43

).

Caution: Formatting a card deletes all pictures and videos,
including protected files.

Insert a card into the slot, then push to seat (

page 4

).

Camera freezes up
when a card is
inserted or
removed.

Turn the camera off, then back on. Make sure the camera is turned off
before inserting or removing a card.

Memory card full.

Insert a new card (

page 4

), transfer pictures to the computer

(

page 33

), or delete pictures (

page 22

).

Memory card and
internal memory
full.

Transfer pictures to the computer (

page 33

), then format the card or

internal memory (

see page 43

).

Caution: Formatting a card deletes all pictures and videos,
including protected files.

If...

Try one or more of the following

Ready light does
not turn on and the
camera does not
work.

Turn on the camera (

page 2

).

Install new batteries (

page 1

) or charge rechargeable batteries.

Turn camera off, then back on.

If...

Try one or more of the following

Advertising