Kodak MD1063 - Manual (Page 53)

Troubleshooting
www.kodak.com/go/support 47
Picture is too dark. ■ Turn on the flash (see page 8 ).
■ Move so that the distance between you and the subject is within the
effective flash range (
see page 54 ).
■ Use Fill flash ( page 8 ) or change your position so light is not behind
the subject.
■ Increase Exposure Compensation (see page 35 ).
Camera does not
recognize SD card. ■ Purchase a certified SD/SDHC card.
■ Reformat the card ( see page 34 ).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
■ Insert a card into the slot, then push to seat (see page 4 ).
Camera freezes up
when a card is
inserted or
removed. ■ Turn the camera off, then back on.
■ Make sure the camera is turned off before inserting or removing a
card.
■ Try another SD/SDHC card.
Memory card full. ■ Insert a new card (see page 4 ), transfer pictures to the computer (see
page 37 ), or delete pictures (see page 17 ).
Memory card and
internal memory
full. ■ Transfer pictures to the computer (see page 37 ), then format the card
or internal memory ( see page 34 ).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
If... Try one or more of the following