Kodak CX6200 - Manual (Page 36)

24
Chapter 2
Setting Exposure Compensation
Use Exposure Compensation to control how much light enters the camera. This
setting is useful for taking pictures in high-contrast scenes, or for retaking
pictures when you are not satisfied with the brightness.
Adjust the exposure by plus or minus 2 steps in 1/2-step increments.
1 In Auto mode , press the Menu button.
2 Press to highlight the Exposure Compensation icon , then
press the OK button.
3 Press to select the Exposure
Compensation setting.
!
If pictures are too light, decrease the
value.
!
If pictures are too dark, increase the
value.
4 Press the OK button to accept the change.
5 Press the Menu button to exit the menu.
6 Use the camera viewfinder or screen to
frame your subject.
7 Press the Shutter button to take the picture.
This setting remains until you turn off
the camera.