Mode-dial-light indicator status – Kodak Z612 User Manual

Page 63

Advertising
background image

Troubleshooting

www.kodak.com/go/support

57

Mode-dial-light indicator status

Picture is too light
or overexposed

■

Reposition camera to reduce the amount of available light.

■

Turn flash off (

page 13

).

■

Move so that the distance between you and the subject is within the
effective flash range (

page 13

).

■

To automatically set exposure and focus, press the Shutter button
halfway. When the AF/AE indicator is green, press the Shutter
button completely down to take the picture.

■

Use P mode to adjust the exposure compensation.

Picture is not clear

■

To automatically set exposure and focus, press the Shutter button
halfway. When the AF/AE indicator is green, press the Shutter
button completely down to take the picture.

■

Clean the lens (

page 71

).

■

Make sure camera is not in Macro AF mode if you are more than
24 in. (61 cm) from your subject.

■

Place the camera on a flat, steady surface or use a tripod, especially
in high-zoom settings or in low light.

If...

Try one or more of the following

Mode dial light
does not turn on
and the camera
does not work

■

Turn on the camera (

page 3

).

■

Recharge the battery or install a new one (

page 2

).

■

Camera may have turned off automatically. Turn on the camera and
change the auto power-off setting (see

page 36

).

Mode dial light
blinks

■

Picture is being processed and saved to the camera. Camera is
operating normally.

■

Camera is connected. Camera is operating normally.

■

Recharge the battery or install a new one (

page 2

).

Mode dial light
glows steady

■

Shutter button is pressed halfway down. Focus and exposure are set.
Camera is operating normally.

■

Camera is operating normally.

If...

Try one or more of the following

Advertising