Axion 8" TFT LCD TV with Card Reader - Manual (Page 22)

I. System Operation
1. Press POWER to switch the unit on or off. The switch
indicator will light red and the unit will go to the mode last
used and stored in memory.
2. Press CARD/TV/AUX to select your desired mode. When
switching the mode, the media player can memorize the
present playing point.
3. Press VOLUME +/– to raise or lower the sound level or
you press PICTURE to adjust picture in the picture select
mode.
4. Each time you press PICTURE, the onscreen picture
adjustment display cycles through adjustment bars for
CONTRAST, BRIGHTNESS, COLOR, TINT,
SHARPNESS, LANGUAGE, and FACTORY PRESET.
Then, use VOLUME +/– to raise or lower the level. This
display will automatically turn off if no adjustments are
made within about 6 seconds, or if any other button is
pressed.
5. Press MUTE to turn off all sound; pressing this button
again restores sound to the previously set level. MUTE
may also be released by pressing VOLUME +/–.
NOTE: Always turn the TV off with standard process.
First, press POWER to set the TV to standby mode.
Than, remove the AC/DC adapter.
CARD READER PLAYING
1. Press CARD/TV/AUX to select Card mode.
22