Kodak DC20 - Manual (Page 28)

6
Installing the Battery
1
Place the edge of a thin coin into the battery
door notch.
2 Using the coin, push the battery door toward
the back of the camera.
3 Insert the 3V lithium battery into the battery
compartment with the (+) end at the top of
the camera.
4 Snap the battery door closed.
.
A blinking Power light indicates low
battery power.
WARNING:
D Read and follow all warnings
and instructions supplied by the
battery manufacturer.
D Keep the battery away from children.
D Do not attempt to disassemble,
recharge, short out, or subject the
battery to high temperature or fire.
D Be sure to properly dispose of the
depleted lithium battery.