Kodak PALMPIX - Manual (Page 4)

4 Preparing the Camera
Preparing the Camera
Loading Batteries
1. Open the battery door (not shown).
2. Insert two AAA batteries into the
chamber as shown.
3. Close the battery door.
Checking Batteries
A battery status symbol appears on the Palm when previewing a
picture (page 6). A black battery symbol means batteries are charged;
a partially black symbol means batteries are weak; and a blinking
symbol indicates batteries are exhausted and need to be replaced.
Connecting the Camera
When connected, the camera lens
faces the back of the Palm.
1. Align the Palm connector and the
camera connector.
2. Push the camera and Palm together
until they lock in place.
To remove the camera, pull it away
from the Palm.