Kodak CX6445 - Manual (Page 44)

32
Chapter 2
Setting Long Time Exposure
In Landscape mode, use Long Time Exposure to control how long the shutter
stays open and to portray a sense of motion. Settings range from 0.7 to 4
seconds.
NOTE: Long Time Exposure cannot be used with Exposure Compensation or
manual ISO speed setting.
When using Long Time Exposure, ISO speed is set to Auto with an
automatic value of 100.
Set Long Time Exposure
1 Turn the Mode dial to Landscape .
2 Press the Menu button.
3 Press to highlight Long Time
Exposure , then press the OK button.
4 In any Still mode, press the Menu button.
5 Press to select an option, then press
the OK button.
6 Press the Menu button to exit the menu.
Take the Picture
1 Place the camera on a flat surface or use a tripod.
2 Use the camera screen to frame your subject. Press the Shutter button
half-way and hold
to set the focus. Press the rest of the way down
to take the picture.
This setting remains until you change the Mode dial or turn off the
camera.