Kodak Z1085 IS - Manual (Page 56)

50 www.kodak.com/go/support
Troubleshooting
Camera does not
recognize
SD/SDHC card. ■ Purchase a certified SD/SDHC card.
■ Format the card ( page 33 ).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
■ Insert a card into the slot, then push to seat ( page 3 ).
Camera freezes up
when a card is
inserted or
removed. ■ Turn the camera off, then back on. Make sure the camera is turned off
before inserting or removing a card.
Memory card full. ■ Insert a new card ( page 3 ), transfer pictures to the computer
( page 44 ), or delete pictures ( page 15 ).
Memory card and
internal memory
full. ■ Transfer pictures to the computer ( page 44 ), then format the card or
internal memory ( page 33 ).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
The Reset Camera
feature did not
take effect. ■ After using the Reset Camera feature ( page 33 ), turn the camera off
and then on again.
Pictures taken on a
tripod are blurry. ■ Occasionally, a tripod interferes with the camera’s image stabilizer. In
the Setup menu, set Image Stabilizer to Off (
page 31 ).
Cannot delete
some pictures. ■ If a picture is tagged as a Favorite, a Protect tag is automatically
applied (and remains even if the Favorite tag is removed). A protected
picture cannot be deleted unless the Protect tag is removed (
page 15 )
or the card/internal memory is formatted ( page 33 ).
Pictures that have
Kodak Perfect
Touch technology
applied (twice) are
of lower image
quality. ■ If Perfect Touch has been applied to a picture on the camera, do not
apply it again when the picture is on the computer (or on a Kodak
kiosk).
NOTE: Kodak Perfect Touch is automatically applied to Pictures taken in Smart
Capture mode.
If Try one or more of the following