Kodak Z5010 - Manual (Page 19)

Doing more with your camera
www.kodak.com/go/Z5010support 19
Using Program and Manual modes
Use these modes when you want more control over your camera.
NOTE: Settings you change in P or M modes apply only to pictures taken in those modes.
The settings, including Flash, are maintained for P and M modes—even when you
change modes or turn off the camera. Use Reset Camera (press the Menu button)
to reset P or M modes to their default settings.
Changing P or M mode settings
1 Turn the Mode dial to P or M.
NOTE: P and M give access to different settings.
2 Press the Info button .
Mode When to use Press to control
Program mode offers
the ease of auto shooting
with full access to all
menu options. The
camera automatically
sets the shutter speed
and aperture (f-stop)
based on the scene
lighting. Exposure compensation (how
much light enters the camera),
flash compensation, and ISO
speed
Manual mode offers a
high level of control.
(To prevent blur, use a
tripod for slow shutter
speeds.) Aperture, shutter speed, flash
compensation, and ISO speed
urg_01292.book Page 19 Thursday, September 8, 2011 6:56 AM