Kodak Z5120 - Manual (Page 63)

Troubleshooting
www.kodak.com/go/support 55
Picture quality problems
Slide Show does not
run on an external
video device. ■ Adjust the camera Video Out setting to NTSC or PAL ( see
page 46 ).
■ Make sure the external device settings are correct. (See the
device’s user guide.)
Computer does not
communicate with
the camera. ■ Turn off the camera, then turn it back on.
■ Make sure the batteries are charged and installed correctly ( see
page 2 ).
■ Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is
connected to the camera and the computer (
see page 36 ). Then
turn on the camera.
Status Solution
Picture is not clear. ■ To automatically set exposure and focus, press the Shutter button
halfway. When the Focus brackets turn green, press the Shutter
button completely down to take the picture.
■ Clean the lens ( see page 61 ).
■ Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
■ Use a larger picture size ( see page 45 ).
■ If you’re manually adjusting the ISO speed, realize that high a ISO
setting may cause grainy pictures.
Status Solution