Kodak M590 - Manual (Page 49)

Troubleshooting
www.kodak.com/go/support 43
Troubleshooting
Camera problems
Status Solution
Camera does not
turn on ■ Make sure the battery is charged and installed correctly ( see
page 1 ).
Camera does not turn
off
Camera buttons and
controls do not
function
LCD is too dark. ■ Adjust the LCD Brightness setting ( see page 36 ).
In Review, a blue or
black screen is
displayed instead of
a picture ■ Transfer all pictures to the computer ( see page 39 ).
■ Take another picture.
Pictures remaining
number does not
decrease after taking a
picture ■ Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)
Flash does not fire ■ Check the flash setting, and change as needed ( see page 10 ).
NOTE: The flash does not fire in all modes.
Memory card is almost
or entirely full ■ Transfer the pictures to the computer ( see page 39 ).
■ Delete pictures from the card ( see page 23 ) or insert a new card.
Battery life is short ■ Make sure the correct battery type is installed ( see page 1 ).
■ Wipe the contacts with a pencil eraser before inserting a battery
in the camera.
■ Insert a new/charged battery ( see page 1 ).