Kodak DVC325 - Manual (Page 13)

9
In
s
ta
lla
tio
n
Connecting the Camera
Once the software is installed on the computer, connect the DVC325 to the
computer.
Caution: Do not connect the camera before installing the software
To connect the camera:
1 Connect the camera cable from the camera to the USB connection on the
computer.
.
2 The computer operating system automatically displays the following message
when it detects the camera: “Unknown device.... Searching for file.”
Wait until the computer loads the necessary drivers and the “Unknown
device...” message disappears.
Note: When using Windows 98, you may need to insert the Windows 98
CD into the CD-ROM drive. If you do not have a Windows 98 CD for
the computer, the computer manufacturer has already installed the
contents of the CD on the hard drive.
Adjusting the Monitor
To view pictures from the DVC325, you may need to use the computer Control
Panel settings to adjust the display properties for the monitor colors (24 or 16 bit
True Color) and the screen area (600 x 800 or higher).
USB Connection
Camera Cable