Kodak C875 - Manual (Page 13)

Doing more with your camera
www.kodak.com/go/c875support 13
Changing the flash settings
NOTE: Flash settings are not available in all Capture or SCN modes. When you change to Auto or Red-eye in
some of these modes, it becomes the default until you change it.
Flash mode Description
Auto Flash The flash fires when the lighting conditions require it.
Fill The flash fires every time you take a picture, regardless of the lighting
conditions. Use when the subject is in shadow or is “backlit” (when
light is behind the subject). In low light, hold the camera steady or use
a tripod.
Red Eye The camera automatically detects and removes red eye from the
picture.
Off The flash never fires.
Flash-to-subject distances
Wide angle 2–13.5 ft (0.6–4.1 m) @ ISO 200
Telephoto 2–8.5 ft (0.6–2.6 m) @ ISO 200
Press the flash button repeatedly to change
the flash modes.
The flash mode appears in the LCD screen.