Care and maintenance, Upgrading your software and firmware, Storage capacities – Kodak MD55 User Manual
Page 57: The lens
Appendix
www.kodak.com/go/support
51
Power—KODAK Li-Ion Rechargeable Digital Camera Battery KLIC-7006; 5V AC
Tripod mount—1/4 inch
Size—96.7 x 57 x 19.5 mm (3.8 x 2.2 x 0.8 in.) @ power off
Weight—130 g (4.6 oz) with battery and card
Operating temperature—0–40
°
C (32–104
°
F)
Care and maintenance
■
If you suspect water has gotten inside the camera, remove the battery and card.
Allow all components to air-dry for at least 24 hours before using the camera.
■
Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft,
lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions
unless designed specifically for camera lenses. Do not allow chemicals, such as
suntan lotion, to contact painted surfaces.
■
Service agreements may be available in your country. Contact a dealer of KODAK
Products for more information.
■
For digital camera disposal or recycling information, contact your local authorities.
In the US, go to the Electronics Industry Alliance site at
or go to
Upgrading your software and firmware
We occasionally update KODAK Software and firmware (the software that runs on the
camera). For instructions on installing the latest version, go to
.
Storage capacities
The LCD displays the approximate number of pictures (or minutes/seconds of video)
remaining. Actual storage capacity varies depending on subject composition, card
size, and other factors. You may be able to store more or fewer pictures and videos.