Kodak CD43 - Manual (Page 49)

Troubleshooting
www.kodak.com/go/support 43
Computer/connectivity problems
Picture quality problems
If... Try one or more of the following
Computer does not
communicate with
the camera ■ Insert a charged battery ( page 1 ).
■ Turn on the camera.
■ Make sure proper USB cable is securely connected on camera and
computer port (
page 15 ). (If using an EasyShare dock, check all
cable connections. Make sure the camera is seated on the dock.)
■ Make sure the EasyShare software is installed ( page 14 ).
Pictures do not
transfer to computer ■ Click the Help button in the EasyShare software.
Slide Show does not
run on an external
video device ■ Adjust the camera Video Out setting (NTSC or PAL, page 31 ).
■ Make sure the external device settings are correct (see the device’s
user’s guide).
If... Try one or more of the following
Picture is too dark
or underexposed ■ Reposition camera for more available light.
■ Use Fill flash ( page 25 ) or change your position so light is not behind
the subject.
■ Move so that the distance between you and the subject is within the
effective flash range (
page 9 ).
■ To automatically set exposure and focus, press the Shutter button
halfway. When the Ready light glows green, press the Shutter
button completely down to take the picture.
■ Adjust the exposure compensation ( page 28 ).