Kodak M1093 IS - Manual (Page 54)

48 www.kodak.com/go/support
Troubleshooting
Direct printing (PictBridge enabled printer) problems
Picture is too light ■ Reposition the camera to reduce the amount of available light.
■ Turn the flash off (see page 7 ).
■ Move so that the distance between you and the subject is within the
effective flash range. (See camera specifications starting on
page 52 .)
■ To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■ In Program and Panorama modes, adjust the Exposure
Compensation (
see page 27 ).
Status Solution
Cannot find the
desired picture ■ Use the Direct printing menu to change the image storage location.
The Direct printing
menu interface turns
off ■ Press any camera button to redisplay the menu.
Cannot print pictures ■ Make sure there is a connection between the camera and the
printer (see
page 39 ).
■ Make sure the printer and the camera have power.
Camera or printer
display an error
message ■ Follow the prompts to resolve the issue.
Status Solution