Kodak HERO 3.1 User Manual

Page 26

Advertising
background image

Troubleshooting

20

www.kodak.com/go/aiosupport

Printhead
carriage jam

■

Open the printer access door and clear any obstructions.

■

Check that the printhead and ink cartridges are installed
correctly. (The printhead and ink cartridges are installed
correctly when you hear them click into place.)

Print quality

■

For best results, use KODAK Paper or a paper with the
COLORLOK Technology logo on the package.

■

Make sure the paper is loaded correctly. See

Loading plain

paper, page 9

and

Loading photo paper, page 10

.

For more help, go to

www.kodak.com/go/hero3_1support

.

Ink cartridge
errors

■

Check that KODAK Ink Cartridge(s) are installed. Do not use
non-Kodak brand or refilled ink cartridges.

■

Remove, then install the cartridges again. Make sure the
cartridges click into place.

Paper jam

■

Open the printer access door and gently remove any paper
from inside the printer.

■

Make sure the paper in the tray is free of tears or creases.

■

Make sure you do not overload the paper tray.

For more help, go to

www.kodak.com/go/hero3_1support

.

Error
codes/messages

Go to

www.kodak.com/go/hero3_1support,

then type your error

code or message.

Problem

Possible Solutions

Advertising