Lenovo ThinkPad SL300 - Manual (Page 152)

14. If you want to assign a filter to the application module, do the following in the Filters tab:
a. Click the Insert Filter icon. The Add Filter window opens.
b. In the left pane of the Add Filters window, navigate to the folder that contains the filter you want
to add.
c. In the right pane of the Add Filter Window, select filter you want to use; then click OK. The Add Filter
window closes and the filter is added to the Filters tab.
d. Double-click on the filter you just added. The Edit Parameters window opens.
e. In the Parameters field, type any parameters required to get the desired result. For information
about the parameters associated with the filters provided with the ImageUltra Builder program, see
the ImageUltra Builder help system.
f. Click OK.
g. If you assign multiple filters to a module, do one of the following:
• If all filters must be satisfied to install the module, click the All of these must be true radio button.
• If any of the filters can be satisfied to install the application, click the One of these must be
true radio button.
15. In the Options tab, do the following:
a. The Path to copy installable files field defines whether the application files should be copied to the
C partition in an installable format.
• If you type a path in this field and you provide a Silent Install Command in the Source tab, the files
will be copied to the C partition in addition to the application being installed.
• If you type a path in this field and you do not provide a Silent Install Command in the Source tab,
the files will be copied to the C partition, but the application will not be installed automatically.
Type a path only if you want the installable files to be copied to the C partition of the target computer.
b. All other fields on the Options tab are used to handle special cases.
• For information about the Install Hook and Install Slot fields, see Chapter 9 “Specifying the
module-installation order” on page 149.
• For information about specific fields on this tab, refer to the ImageUltra help system.
• For other information about using this tab for special cases, see Chapter 12 “Getting help and
support” on page 167.
16. Click the Save icon in the Main window tool bar; then, close the Application window.
17. Continue with “Building a new module” on page 148.
Setting the attributes based on an existing application module
To set the attributes for a new application module to the match the attributes of an existing application
module, do the following:
1. Open the repository where you want the new application module to reside.
2. If your repository contains folders, navigate to the folder where you want the new application module to
reside.
3. From the Main Window menu bar, click Insert and then click Application.... The New Module Wizard
opens.
4. Click Next.
5. Verify that the Application radio button is selected, and then click Next.
6. In the Name field, type a name that you want to use to identify this module. Be as specific as possible.
This name will be the name that appears in the repository.
7. Click the No radio button to indicate that this module is not a container.
8. Click Next.
138 ImageUltra Builder Version 5.01 User Guide