Lenovo IdeaPad U110 - Manual (Page 41)

Chapter 2. Using Your Computer
30
„ Using wireless LAN
A diversity antenna system is built into the display for optimal reception,
enabling wireless connection wherever you are.
To enable wireless communications, do the following;
1 Slide the Wireless device switch latch to the right.
2 Press Fn + F5.
3 Set the Wireless to Enable.
Note:
You can lock and unlock Wireless Network Interface via BIOS Setup Utility.
1 Turn on your computer, press F2 while the initial screen is displayed.
The BIOS Setup Utility screen opens.
2 Select Security, using the cursor directional keys.
3 Select I/O Interface Security, and press the Enter key. The I/O Interface
Security window opens.
4 Select Wireless Network Interface and press the Enter key. The
Options window opens.
5 Choose UNLOCKED to enable your Wireless Network Interface and
LOCKED to disable.
6 Press F10 to exit.
7 Select OK in the Setup Confirmation window.