Lenovo Flex 10 Notebook Lenovo - Manual (Page 38)

34
Lenovo IdeaPad Flex 10 Hardware Maintenance Manual
Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several
kinds. When you replace the base cover, you need to apply the following
labels:
The following labels need to be peeled off from the old base cover and put on
the new base cover.
a Wlan + BT label
b Indonesia label
c KCC label
d Print label
e Rating label
f Win8 GML label
For some models, you also need to apply one or two FCC labels. Check the
old base cover; if it has one or two FCC labels, find duplicates of them in the
label kit and apply them to the new base cover.
For the location of each label, refer to the following figure:
a
c
d e f
b