Lenovo V480s - Manual (Page 68)

• “1060 mSATA solid-state drive” on page 43
• “1070 Keyboard” on page 44
• “1080 Keyboard bezel” on page 46
• “1130 System board assembly” on page 52
• “1180 I/O board, DC-in bracket, and DC-in cable” on page 58
• “1190 Speaker assembly” on page 61
Removal steps of LCD unit and base cover
Release the antenna cables from the cable guides. Then remove the screws 1 .
1
1
1
1
Step Screw (quantity) Color Torque
1 M2.5 × 7 mm, flat-head, nylon-coated (4) Silver 4.0 kgf-cm
When installing:
• Route the antenna cables along the cable guides. As you route the cables, make sure that they are
not subjected to any tension. Tension could cause the cables to be damaged by the cable guides,
or a wire to be broken.
• Make sure that the LCD connector is attached firmly and make sure that you do not pinch the antenna
cables when you attach the LCD assembly. Route the LCD cable along the cable guides.
62 Hardware Maintenance Manual