Lenovo ThinkPad T410s - Manual (Page 97)

7
6
When installing:
• Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams,
on the part marked a as in the following figure. Either too much or too less application of grease can
cause a thermal problem due to imperfect contact with a component. You need to peel the thin film
off from the rubber
b .
For ThinkPad T400s:
a
b
For ThinkPad T410s and T410si:
a
When installing: Make sure that the fan connector is attached firmly.
For ThinkPad T400s:
8
9
9
Chapter 8 . Removing and replacing a FRU 91