Lenovo E40-70 Notebook - Manual (Page 71)

Detach the connector 6 , and then remove the touch pad board cable in the direction shown by arrow 7 .
g
f
When installing: make sure that the touch pad board cable connector is firmly attached.
Remove one screw 8 , and then remove the finger printer bracket in the direction shown by arrow 9 .
b
a
Step Screw (quantity) Color Torque
8 M2 × 3mm, flat-head, nylon-coated (1) black 1.0– 1.5 kgfcm
Remove the finger printer broad in the direction shown by arrow 10 .
j
Chapter 10 . Removing or replacing a FRU 65