Lenovo E40-70 Notebook - Manual (Page 67)

Remove the card in the direction shown by arrow 3 .
c
When installing:
1. In models with a wireless LAN card that has two antenna connectors, plug the black cable (1st)
(MAIN) into the jack labeled MAIN or 1 on the card, and the white cable (2nd) (AUX) into jack labeled
AUX or 2 on the card.
2. In models with a wireless LAN card that has three antenna connectors, plug the black cable (1st) (MAIN)
into the jack labeled MAIN or 1, the grey cable (3rd) into jack labeled 1, and the white cable (2nd)
(AUX) into jack labeled 2 on the card.
1070 Memory module
For access, remove these FRUs in order:
•
“1010 External battery pack” on page 54
• “1040 Base cover assembly” on page 57
Removal steps of the memory module
Release the two latches on both edges of the socket at the same time in the direction shown by arrows 1 ,
and then unplug the DIMM in the direction shown by arrow 2 .
a a
b
When installing:
Insert the notched end of the memory module into the memory slot. Press the memory module in firmly,
and pivot it downward until it snaps into place. Ensure that the memory module is firmly installed in the
slot and does not move easily.
Chapter 10 . Removing or replacing a FRU 61