Lenovo L2361p Wide Flat Panel Monitor - Manual (Page 10)

7.
Chapter 1. 1-6
Connect the audio cable to A/I audio jack of the monitor and the other end on the
back of the computer soundcard audio out jack.
9. Place all cables(Power cord/ VGA/HDMI/USB/Audio) into the cable clip indicated in
below figure.
8. Insert the power cord into the monitor ,then plug the monitor power cord and the
computer cord into grounded electrical outlets.
Note: A certified power supply cord has to be used with this equipment. The
relevant national installation and/or equipment regulations shall be considered. A
certified power supply cord not lighter than ordinary polyvinyl chloride flexible
cord according to IEC 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2
3G0.75mm2) shall be used. Alternative a flexible cord be of synthetic rubber according
to IEC 60245 (designation H05RR-F 3G 0.75mm2) shall be used.