Lenovo Flex 2-15D Notebook Lenovo - Manual (Page 73)

Lenovo Flex 2-14/Flex 2-14D/Flex 2-15/Flex 2-15D
69
1150 Antenna assembly and LCD cover
For access, remove these FRUs in order:
• “1010 Keyboard” on page 34
• “1020 Optical drive” on page 36
• “1030 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot
compartment cover” on page 37
• “1040 Battery pack” on page 39
• “1050 Hard disk drive” on page 40
• “1060 DIMM” on page 42
• “1070 PCI Express Mini Card for wireless LAN/WAN” on page 43
• “1080 Fan assembly and Heat Sink assembly” on page 45
• “1090 System board” on page 49
• “1100 LCD unit” on page 53
• “1110 Speakers, base cover, IO board, DC-IN, power board and ODD transfer
board” on page 56
• “1120 LCD front bezel” on page 64
• “1130 LCD panel, LCD cable and hinges” on page 66
• “1140 Integrated camera” on page 68
Figure 15. Removal steps of antenna assembly and LCD cover
Peel off the adhesive tapes securing the antenna boards, release the cables from
the cable guide, and then remove the antenna assembly in the direction shown
by arrows
.
When installing: Route the antenna cables along the cable guides and secure the
antenna boards with adhesive tapes. As you route the cables, make sure that they
are not subjected to any tension. Tension could cause the cables to be damaged
by the cable guides, or a wire to be broken.
a
a
a