Lenovo IdeaPad S410p Notebook - Manual (Page 70)

66
IdeaPad S410p/S410p Touch/S510p/S510p Touch Hardware
Maintenance Manual
Figure 15. Removal steps of non-touch LCD unit (S410p/S510p) (continued)
Remove the screws
5
. Then release the hinges in the direction shown by
arrows
6
.




Step Screw (quantity) Color Torque
5
M2 × 3 mm, flat-head, nylok-coated (6) (S410p)
Hinge Bracket to LCD Cover
Black 1.85+/-0.15 kgf*cm
5
M2.5 × L2.5 x D8 mm, flat-head, nylok-coated (6)
(S510p) Hinge Bracket to LCD Cover
Black 3.0+/-0.3 kgf*cm
Detach the integrated camera connector in the direction shown by arrow 7 .
Then remove the camera and LCD cable in the direction shown by arrows
8
.
Note: The integrated camera is stuck on the top center of the LCD cover.




When installing: Stick the integrated camera to the top center of the LCD
cover and ajust its placement to make sure the connector is attached firmly.