Alamo RHINO TX235 - Manual (Page 111)

OPERATION
TX235 02/07 Operation Section 4-17
© 2007 Alamo Group Inc.
OPERA
T
ION
• Check that the main driveline securely
attached to the tractor and the locking collar is
seated in the groove of the PTO Shaft.
• Ensure wing drivelines are secure at both
ends.
• Ensure the mower hitch is securely attached
to the tractor drawbar with a proper size bolt
and secured nut.
• Ensure that a properly rated safety tow chain
is equipped securing the mower to the tractor.
OPS-R-0073
• Ensure the driveline integral shields are in
good condition and rotate freely.
• Inspect that all bolts and screws are in
position and are properly torqued. OPS-R-
0049
• Inspect the condition of the drive belts.
• Ensure the slip clutch is properly adjusted and
the friction plates are not frozen together. Ref-
erence the Maintenance Section for proper
slip clutch maintenance.
• Ensure the slip clutch shield and drive belt
shields are in place and in good repair.
• Ensure the tractor PTO master shield is in
place, lowered and in good condition. OPS-R-
0064_A