Lenovo Yoga Tablet 8 B6000 - Manual (Page 59)

Lenovo B6000 / B8000
55
1090 Sub board
For access, remove this FRU:
• “1010 Rear cover” on page 28
1. Remove four screws for fixing the sub board to the main body.
Figure 9-1 Screws on the sub board
Important notices for handling PCB:
When handling PCB, bear the following in mind:
• Be careful not to drop the PCB onto a bench top that has a hard surface,
such as surface made of metal, wood, or composite materials.
• Avoid rough handling of any kind.
• Make sure not to drop or stack the PCB in the whole process.
• Make sure to put the PCB only on surface covered with materials such as
an ESD mat or conductive corrugated plate.
a