Lenovo B575e Notebook - Manual (Page 78)

Applying labels to the base cover
The new base cover is shipped with a kit containing labels of several kinds. Apply those labels listed when
you replace the base cover. For the labels which are not shipped with the new base cover, peel them off
from the old base cover, and adhere them to the new one.
Note: If you replace a part with the Windows Certificate of Authentication (COA) label 12 , return the old part
with the label attached to the customer. Otherwise, you can provide the customer with a letter, stating the
original location of the label on the computer and the information on the label, such as the part number,
serial number, and product key.
The following labels need to be peeled off from the old base cover, and need to be put on the new base cover.
1 Wistron label Indonesia D side label 7 Indonesia wireless LAN and Bluetooth label
2 Brazil Bluetooth label or Bluetooth label for United
States/Canada/Taiwan wireless WAN IMEI barcode label
8 Indonesia wireless LAN and Bluetooth label
3 Brazil wireless LAN label or wireless LAN label for
United States/Canada/Taiwan
9 Malaysia SIRIM label
4 Brazil wireless LAN label or wireless LAN label for
United States/Canada/Taiwan
10 PPT label
5 Israel label 11 China label or KCC label
6 Israel label PPT label 13 Rating label
For the location of each label, refer to the following figure:
2
1
12
13
3
4
11
5
6
7
8
10
9
2010 LCD front bezel
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 44
• “1020 Bottom slot cover” on page 44
• “1030 Hard disk drive” on page 45
• “1040 Optical drive” on page 47
• “1050 Memory modules” on page 48
• “1060 PCI Express Mini Card for wireless LAN” on page 49
• “1070 Backup battery” on page 50
72 Hardware Maintenance Manual