Lenovo E4325 - Manual (Page 43)

3
4
6. Remove the hard disk drive by lifting the tab 5 .
5
7. Slide a new hard disk drive firmly into place, and then reinstall the screws to secure the drive.
8. Reinstall the bottom slot cover, and then reinstall the screws to secure the cover.
9. Reinstall the battery pack. See “Replacing the battery pack” on page 25.
10. Turn the computer over again. Connect the ac power adapter and all cables.
Replacing the memory module
Before you start, print these instructions.
Note: The operating speed of a memory module has dependency on the system configuration. In some
conditions, the memory module in your computer might not be able to operate at the maximum speed.
Attention: Before you start installing a memory module, touch a metal table or a grounded metal object. This
action reduces any static electricity from your body. The static electricity could damage the memory module.
To replace the memory module, do the following:
Note: Your computer might have slight variations from the following illustrations.
1. Turn off the computer and then disconnect the ac power adapter and all cables from the computer. Wait
three to five minutes to let the computer cool.
2. Close the computer display, and turn the computer over.
3. Remove the battery pack. See “Replacing the battery pack” on page 25.
4. Remove the screws 1 , and then remove the bottom slot cover 2 .
Chapter 6 . Replacing devices 29