Lenovo V570 Notebook - Manual (Page 71)

Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the
base cover, you need to apply the following label:
The following labels need to be peeled off from the old base cover, and need to be put on the new base cover.
a Palmrest Label f Malaysia SIRIM Label
b PRC/MTM Label g Brazil Label (WLAN) or WLAN Label for US/CA/TW or
Israel LBL for WLAN
c Rating Label h PPT Label
d COA Label I Indonesia WLAN&BT LBL
e Wistron Label j Brazil Label (BT) or BT Label for US/CA/TW
For some models, you also need to apply one or two FCC labels. Check the old base cover; if it has one or
two FCC labels, find duplicates of them in the label kit and apply them to the new base cover.
For the location of each label, refer to the following figures:
a
b
d
c
g
j
i
g
f
e
h
Chapter 7 . Removing and replacing a FRU 65