Lenovo ThinkPad T43p - Manual (Page 2)

2
Installing Optional memory
The following terms are trademarks of the IBM Corporation in the United States
or other countries or both:
IBM, ThinkPad, TrackPoin
age, UltraNav, and UltraConnect. t, ThinkLight, ThinkVant
Your name:
Company name:
Model number:
Serial number:
Company or reseller service:
IBM service Web site:
IBM service number:
You can increase the amount of memory in your computer.
Verify proper installation of the optional SO-DIMM:
1 Turn on the computer.
2 Press the Access IBM button when prompted during startup.
3 Open the IBM BIOS Setup Utility b igure" category or double-clicking y clicking "Access BIOS" under the "Conf
"Start Setup Utility."
4
1
Install the optional SO-DIMM:
1
2 Turn off the computer.
3
4
5 Remove the battery.
6 Loosen the screws on the memory slot cover, and
then remove the cover.
7
8
9 Replace the memory slot cover.
10
Note: Only use memory types supporte tly install the optional memory or install an d by your computer. If you incorrec
unsupported memory type, a warning beep will sound when you try to start the computer. To replace the standard memory
that is accessed by removing your keyboard, refer to the procedure described within Access IBM.
Touch a grounded metal object to reduce
any static electricity in your body that could
damage the SO-DIMM. Avoid touching the contact
edge of the SO-DIMM.
Close the computer display and turn the computer
over.
Disconnect the ac adapter and all cables from the
computer.
Attention: Never use the computer with the
memory slot cover open.
Replace the battery and re-connect the ac
adapter and cables.
Verify that the "Installed memory" item shows the t r computer. For example, if your otal amount of memory installed in you
computer had 256 MB of standard memory and you install an additional 512 MB SO-DIMM, the quantity shown in
"Installed memory" should be 768 MB.
If a SO-DIMM is already installed, remove it as
shown. Save the SO-DIMM for future use.
Copyrigh © t IBM Corporation 2004
For Barcode Position Only
Align the notch in the contact edge of the SO-DIMM
with the divider in the socket. Firmly insert the
SO-DIMM into the socket at an angle of 20 degrees
, and then pivot it downward until it snaps into
place .
1
2
Security
You can get information about ThinkVantage Technologies
at any time by pressing the blue Access IBM button on your keyboard.
Access Connections
Some ThinkPad computers are equi ter. pped with a wireless LAN adap
To learn more about configurating wireless LAN and other communication
adapters including your wired connections, enter "Access Connections"
in the Access IBM keyword search field.
Migration
You can move data from your old computer to this ThinkPad.
Enter "migration" in the Access IBM keyword search field to learn about
downloading data migration software.
IBM Help and Support
To learn about IBM Help and Support, choose the Get Help & Support
category in Access IBM.
* Additional unpacking notes:
1) Some models may contain items that are not listed.
2) If any item is missing or damaged, p chase. lease contact your place of pur
3) Your computer features IBM Disk-t ng for recovering o-Disk Recovery. Everythi
factory-installed files and applications is on your hard disk eliminating the need for
a recovery CD. For more information, see "Recovering Pre-Installed Software" in
the Service and Troubleshooting Guide.
Some ThinkPad computers have an embedded security chip.
To learn about downloading the software and enabling the chip, enter
"security chip" in the Access IBM keyword search field.
Some ThinkPad computers also have a fingerprint sensor.
To learn more about the sensor, enter "fingerprint sensor" in
the Access IBM keyword search field.
1
2
1 2
T40 series Setup Poster
P/N 27R0508
08/04/2004
Size : 11x14 inches
Color : 1 color job = Black (PMS Process Black C)
(#Gray=45% Black, 20% Black)
Font : IBM Fonts and Helvetica Neue Family
Material : 100 gsm gloss art paper (Us
apan. ) e 100% recycled paper in only J
Blue line shows die-cut. DO NOT PRINT.
Please change the barcode No.