Laser compliance statement – Lenovo ThinkPad Edge E420s User Manual

Page 13

Advertising
background image

The following notice applies to all countries and regions:

DANGER

Outdoor antenna
grounding

If an outside antenna or cable system is connected
to the equipment, be sure the antenna or cable
system is grounded as to provide some protection
against voltage surges and built-up static charges.

Lightning

For added protection for this equipment during a
lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna or cable
system. This will prevent damage to the video
product due to lightning and power line surges.

Power lines

An outside antenna system should not be located
in the vicinity of overhead power lines or where it
can fall into such power lines or circuits. When
installing an outside antenna system, extreme care
should be taken to keep from touching such power
lines or circuits, as contact with them may be fatal.

Laser compliance statement

CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or
transmitters) are installed, note the following:

• Do not remove the covers. Removing the covers of the laser product

could result in exposure to hazardous laser radiation. There are no
serviceable parts inside the device.

• Use of controls or adjustments or performance of procedures other than

those specified herein might result in hazardous radiation exposure.

DANGER

Some laser products contain an embedded Class 3A or Class 3B laser
diode. Note the following.

Laser radiation when open. Do not stare into the beam, do not view
directly with optical instruments, and avoid direct exposure to the beam.

Safety and Warranty Guide

xi

Advertising