Lenovo M30-70 Notebook - Manual (Page 43)

Lenovo M30-70
39
1050 Fan assembly and Heat Sink assembly
For access, remove this FRU:
• “1010 Battery pack” on page 32
Figure 5. Removal steps of fan assembly and heat sink assembly
Unplug the fan connector in the direction shown by arrow .
When installing: Make sure that the fan connector is attached firmly to the
system board.
Remove six screws and two screws .
Step Screw (quantity) Color Torque P/N
M2 × 3 mm, flat-head, nylok-coated (4)
M2 × 5 mm, flat-head, nylok-coated (2) Silver
Silver 1.85 kgfcm
1.85 kgfcm 90202853
a
a
b c
c
b
b
b
c
b
b