Lenovo IdeaPad S100c Notebook - Manual (Page 59)

55
Lenovo IdeaPad S100c
1110 Fan assembly and Heat Sink assembly
For access, remove these FRUs in order:
“1010 Battery pack” on page 34 •
“1020 Dummy cards” on page 35 •
“1030 Hard disk drive (HDD) slot cover and HDD” on page 36 •
“1040 DIMM cover” on page 38 •
“1050 DIMM” on page 39 •
“1060 PCI Express Mini Card for wireless LAN/WAN” on page 40 •
“1070 Keyboard cover, keyboard and LED board” on page 42 •
“1080 LCD unit” on page 45 •
“1090 Keyboard bezel, speakers and Bluetooth card” on page 48 •
“1100 System board” on page 52 •
Figure 11. Removal steps of fan assembly and heat sink assembly
Unplug the connector in the direction shown by arrow a. Remove two screws b.
2
2
1
When installing: Make sure that the fan connector is attached fi rmly to the
system board.
Step Screw (quantity) Color Torque
b M2 × 3.5 mm, fl at-head, nylok-coated (2) Black or
Silver 1.85 kgfcm