AEG 88840 User Manual

Page 4

Advertising
background image

• When removing from the socket, never pull the mains plug by the cable, instead take a

hold of the plug.

• The height adjustable screw feet must never be removed.

• The plug must be accessible after installing the machine

• Manifold plugs, couplings and extension cables must not be used. Risk of fire from over-

heating!

• Do not spray down the appliance with jets of water. Risk of electric shock!

• Do not lean on the open door. The appliance may tip over.

• Once the drying cycle or ProSteam programme has been interrupted, the laundry and

drum may be hot. Risk of burns! Take care when removing the laundry.

• Take care when interrupting the ProSteam programme: Do not open the machine door

during the steam phase. Hot steam may result in burns. The display shows a message to

indicate the steam phase.

• The final part of a drying cycle occurs without heat (cool down cycle) to ensure that the

items are left at a temperature that ensures that the items will not be damaged.

•

Caution – Hot surface:

Do not touch the back of the appliance while it is operating.

WARNING!

Never stop a tumble dry before the end of the drying cycle unless all items are

quickly removed and spread out so that the heat is dissipated. Risk of fire!

•

Risk of electric shock! Do not spray down the appliance with jets of water.

Installation

• Note the "Installation" instructions.

•

Important! Appliance must be moved in vertical position for transport.

• This appliance is heavy. Care should be taken when moving it.

• When unpacking the appliance, check that it is not damaged. If in doubt, do not use it

and contact the Service Centre.

• All packing must be removed before use. Serious damage can occur to the product and

to property if this is not adhered to. See relevant section in the user manual.

• Any electrical work required to install this appliance should be carried out by a qualified

electrician or competent person.

• Care must be taken to ensure that the appliance does not stand on the electrical supply

cable.

• If the machine is situated on a carpeted floor, please adjust the feet in order to allow air

to circulate freely under the appliance.

• After having installed the appliance, check that it is not pressing or standing on its

electrical supply cable.

• If the tumble dryer is placed on top of a washing machine, it is compulsory to use the

stacking kit (optional accessory).

Use

• The appliance is intended for drying and steam treatment of standard laundry in do-

mestic applications.

• This appliance is designed for domestic use. It must not be used for purposes other than

those for which it was designed.

• Only wash fabrics which are designed to be machine dried. Follow the instructions on

each garment label.

4

Important safety information

Advertising