Lenovo E4430 User Manual
Page 55
Advertising
Lenovo E4430 and ZhaoYang E4430
51
Figure 10. Removal steps of system board (continued)
When installing:
Make sure that all the connectors are attached firmly.
Remove the system board in the direction shown by arrow
.
When installing:
When attaching the system board to the base cover, adjust the
placement of the USB ports as shown in
, and make sure that both of the USB
jacks are attached to the holes on the base cover as shown in
. Improper
placement of the switch or those jacks might cause a damage.
Step
Screw (quantity)
Color Torque
M2 × 3 mm, flat-head, nylok-coated (3)
Black
1.85+/-0.15 kgfcm
d
a
e
e
a
a
Advertising