Replacing the keyboard – Lenovo B485 Notebook User Manual

Page 54

Advertising
background image

5

7. Remove the screws and detach the brackets from the hard disk drive.

8. Attach the bracket to a new hard disk drive and reinstall the screws to secure the bracket.

9. Place the new hard disk drive into the hard disk drive bay with the tab facing upwards and the

connectors facing each other.

10. Slide the hard disk drive firmly into place, and then reinstall the screw to secure the drive

11. Reinstall the computer cover, and then reinstall the screws to secure the cover.

12. Reinstall the battery. See “Replacing the battery” on page 31.

13. Turn the computer over again. Connect the ac power adapter and all cables.

Replacing the keyboard

Before you start, print these instructions.

Prerequisites for the procedure

DANGER

During electrical storms, do not connect the cable to or disconnect it from the telephone outlet
on the wall.

DANGER

Electric current from power, telephone, and communication cables is hazardous. To avoid shock
hazard, disconnect the cables before opening the cover of this slot.

To replace the keyboard, refer to the instructions for the computer.

“Lenovo B480 and B485” on page 38

“Lenovo B580” on page 40

Lenovo B480 and B485

To replace the keyboard, do the following:

1. Turn off the computer; then disconnect the ac power adapter and all cables from the computer. Wait

three to five minutes to let the computer cool.

2. Close the computer display, and turn the computer over.

3. Remove the battery. See “Replacing the battery” on page 31.

38

User Guide

Advertising