Strategy for replacing a hard disk drive, Important notice for replacing a system board, Important notice for replacing – Lenovo Y50-70 User Manual

Page 21: A system board

Advertising
background image

17

Important service information

Use the following strategy to prevent unnecessary expense for replacing and

servicing FRUs:
• If you are instructed to replace an FRU, but the replacement does not solve

the problem, reinstall the original FRU before you continue.

• Some computers have both a processor board and a system board. If you

are instructed to replace either of them, and replacing one of them does not

solve the problem, reinstall that board, and then replace the other one.

• If an adapter or a device consists of more than one FRU, any of the FRUs

may be the cause of the error. Before replacing the adapter or device,

remove the FRUs one by one to see if the symptoms change. Replace only

the FRU that changed the symptoms.

Attention: The setup configuration on the computer you are servicing may

have been customized. Running Automatic Configuration may alter the

settings. Note the current configuration settings (using the View Configuration

option); then, when service has been completed, verify that those settings

remain in effect.

Strategy for replacing a hard disk drive

Always try to run a low-level format before replacing a hard disk drive. This

will cause all customer data on the hard disk to be lost. Make sure that the

customer has a current backup of the data before performing this action.
Attention: The drive startup sequence in the computer you are servicing may

have been changed. Be extremely careful during write operations such as

copying, saving, or formatting. If you select an incorrect drive, data or programs

can be overwritten.

Important notice for replacing a system board

Some components mounted on a system board are very sensitive. Improper

handling can cause damage to those components, and may cause a system

malfunction.
Attention: When handling a system board:

• Do not drop the system board or apply any excessive force to it.
• Avoid rough handling of any kind.
• Avoid bending the system board and hard pushing to prevent cracking at

each BGA (Ball Grid Array) chipset.

Advertising
This manual is related to the following products: