Lenovo IdeaPad V360 - Manual (Page 36)

32
Appendix A. CRU instructions
Replacing memory - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
You can increase the amount of memory in your computer by installing a
double data rate (DDR3) small outline dual inline memory module (SO-
DIMM)-available as an option-in the memory slot of your computer. SO-
DIMMs are available in various capacities.
To install an SO-DIMM, do the following:
1 Touch a metal table or a grounded metal object to reduce any static elec-
tricity in your body, which could damage the SO-DIMM. Do not touch
the contact edge of the SO-DIMM.
2 Turn off the computer. Disconnect the AC adapter and all cables from the
computer.
3 Close the computer display, and turn the computer over.
4 Remove the battery again.
5 Remove the Memory compartment cover.
a.Loosen the screw that secures the compartment cover .
b.Remove the compartment cover .
Note: Use only the memory types supported by your computer. If you incorrectly install
optional memory, or install an unsupported memory type, a warning beep will sound
when you try to start the computer.
a
b
a
b